diff --git a/Minecraft.World/ByteArrayInputStream.cpp b/Minecraft.World/ByteArrayInputStream.cpp
index 9509206d..29f6fc26 100644
--- a/Minecraft.World/ByteArrayInputStream.cpp
+++ b/Minecraft.World/ByteArrayInputStream.cpp
@@ -2,13 +2,13 @@
 
 #include "InputOutputStream.h"
 
-//Creates ByteArrayInputStream that uses buf as its buffer array. The initial value of pos is offset and
-//the initial value of count is the minimum of offset+length and buf.length. The buffer array is not copied.
-//The buffer's mark is set to the specified offset.
-//Parameters:
-//buf - the input buffer.
-//offset - the offset in the buffer of the first byte to read.
-//length - the maximum number of bytes to read from the buffer.
+// Creates ByteArrayInputStream that uses buf as its buffer array. The initial value of pos is offset and
+// the initial value of count is the minimum of offset+length and buf.length. The buffer array is not copied.
+// The buffer's mark is set to the specified offset.
+// Parameters:
+// buf - the input buffer.
+// offset - the offset in the buffer of the first byte to read.
+// length - the maximum number of bytes to read from the buffer.
 ByteArrayInputStream::ByteArrayInputStream(byteArray buf, unsigned int offset, unsigned int length)
     : pos(offset), mark(offset)
 {
@@ -23,107 +23,120 @@ ByteArrayInputStream::ByteArrayInputStream(byteArray buf, unsigned int offset, u
     else
     {
         count = offset + length;
-	this->buf = buf;
+    }
+    this->buf = buf;
 }
 
-//Creates a ByteArrayInputStream so that it uses buf as its buffer array. The buffer array is not copied.
-//The initial value of pos is 0 and the initial value of count is the length of buf.
-//Parameters:
-//buf - the input buffer.
+// Creates a ByteArrayInputStream so that it uses buf as its buffer array. The buffer array is not copied.
+// The initial value of pos is 0 and the initial value of count is the length of buf.
+// Parameters:
+// buf - the input buffer.
 ByteArrayInputStream::ByteArrayInputStream(byteArray buf)
-	: pos( 0 ), count( buf.length ), mark( 0 )
+    : pos(0), count(buf.length), mark(0)
 {
-	this->buf = buf;
+    this->buf = buf;
 }
 
-//Reads the next byte of data from this input stream. The value byte is returned as an int in the range 0 to 255.
-//If no byte is available because the end of the stream has been reached, the value -1 is returned.
-//This read method cannot block.
-//Returns:
-//the next byte of data, or -1 if the end of the stream has been reached.
+// Reads the next byte of data from this input stream. The value byte is returned as an int in the range 0 to 255.
+// If no byte is available because the end of the stream has been reached, the value -1 is returned.
+// This read method cannot block.
+// Returns:
+// the next byte of data, or -1 if the end of the stream has been reached.
 int ByteArrayInputStream::read()
 {
-	if( pos >= count )
-		return -1;
-	else
-		return buf[pos++];
+    if (pos >= count)
+    {
+        return -1;
+    }
+    else
+    {
+        return buf[pos++];
+    }
 }
 
-//Reads some number of bytes from the input stream and stores them into the buffer array b.
-//The number of bytes actually read is returned as an integer. This method blocks until input data is available,
-//end of file is detected, or an exception is thrown.
-//If the length of b is zero, then no bytes are read and 0 is returned; otherwise, there is an attempt to read at least one byte.
-//If no byte is available because the stream is at the end of the file, the value -1 is returned; otherwise,
-//at least one byte is read and stored into b.
+// Reads some number of bytes from the input stream and stores them into the buffer array b.
+// The number of bytes actually read is returned as an integer. This method blocks until input data is available,
+// end of file is detected, or an exception is thrown.
+// If the length of b is zero, then no bytes are read and 0 is returned; otherwise, there is an attempt to read at least one byte.
+// If no byte is available because the stream is at the end of the file, the value -1 is returned; otherwise,
+// at least one byte is read and stored into b.
 //
-//The first byte read is stored into element b[0], the next one into b[1], and so on. The number of bytes read is,
-//at most, equal to the length of b. Let k be the number of bytes actually read; these bytes will be stored in elements b[0] through b[k-1],
-//leaving elements b[k] through b[b.length-1] unaffected.
+// The first byte read is stored into element b[0], the next one into b[1], and so on. The number of bytes read is,
+// at most, equal to the length of b. Let k be the number of bytes actually read; these bytes will be stored in elements b[0] through b[k-1],
+// leaving elements b[k] through b[b.length-1] unaffected.
 //
-//The read(b) method for class InputStream has the same effect as:
+// The read(b) method for class InputStream has the same effect as:
 //
-// read(b, 0, b.length)
-//Parameters:
-//b - the buffer into which the data is read.
-//Returns:
-//the total number of bytes read into the buffer, or -1 is there is no more data because the end of the stream has been reached.
+//  read(b, 0, b.length)
+// Parameters:
+// b - the buffer into which the data is read.
+// Returns:
+// the total number of bytes read into the buffer, or -1 is there is no more data because the end of the stream has been reached.
 int ByteArrayInputStream::read(byteArray b)
 {
-	return read( b, 0, b.length );
+    return read(b, 0, b.length);
 }
 
-//Reads up to len bytes of data into an array of bytes from this input stream. If pos equals count,
-//then -1 is returned to indicate end of file. Otherwise, the number k of bytes read is equal to the smaller of len and count-pos.
-//If k is positive, then bytes buf[pos] through buf[pos+k-1] are copied into b[off] through b[off+k-1] in the manner
-//performed by System.arraycopy. The value k is added into pos and k is returned.
-//This read method cannot block.
-//Parameters:
-//b - the buffer into which the data is read.
-//off - the start offset in the destination array b
-//len - the maximum number of bytes read.
-//Returns:
-//the total number of bytes read into the buffer, or -1 if there is no more data because the end of the stream has been reached.
+// Reads up to len bytes of data into an array of bytes from this input stream. If pos equals count,
+// then -1 is returned to indicate end of file. Otherwise, the number k of bytes read is equal to the smaller of len and count-pos.
+// If k is positive, then bytes buf[pos] through buf[pos+k-1] are copied into b[off] through b[off+k-1] in the manner
+// performed by System.arraycopy. The value k is added into pos and k is returned.
+// This read method cannot block.
+// Parameters:
+// b - the buffer into which the data is read.
+// off - the start offset in the destination array b
+// len - the maximum number of bytes read.
+// Returns:
+// the total number of bytes read into the buffer, or -1 if there is no more data because the end of the stream has been reached.
 int ByteArrayInputStream::read(byteArray b, unsigned int offset, unsigned int length)
 {
-	if( pos == count )
-		return -1;
+    if (pos == count)
+    {
+        return -1;
+    }
 
-	int k = min( length, count-pos );
-	XMemCpy( &b[offset], &buf[pos], k );
-	//std::copy( buf->data+pos, buf->data+pos+k, b->data + offset ); // Or this instead?
+    int k = min(length, count - pos);
+    XMemCpy(&b[offset], &buf[pos], k);
+    // std::copy( buf->data+pos, buf->data+pos+k, b->data + offset ); // Or this instead?
 
-	pos += k;
+    pos += k;
 
-	return k;
+    return k;
 }
 
-//Closing a ByteArrayInputStream has no effect.
-//The methods in this class can be called after the stream has been closed without generating an IOException.
+// Closing a ByteArrayInputStream has no effect.
+// The methods in this class can be called after the stream has been closed without generating an IOException.
 void ByteArrayInputStream::close()
 {
-	return;
+    return;
 }
 
-//Skips n bytes of input from this input stream. Fewer bytes might be skipped if the end of the input stream is reached. The actual number k of bytes to be skipped is equal to the smaller of n and count-pos. The value k is added into pos and k is returned.
-//Overrides:
-//skip in class InputStream
-//Parameters:
-//n - the number of bytes to be skipped.
-//Returns:
-//the actual number of bytes skipped.
-int64_t ByteArrayInputStream::skip(int64_t n)
+// Skips n bytes of input from this input stream. Fewer bytes might be skipped if the end of the input stream is reached. The actual number k of bytes to be skipped is equal to the smaller of n and count-pos. The value k is added into pos and k is returned.
+// Overrides:
+// skip in class InputStream
+// Parameters:
+// n - the number of bytes to be skipped.
+// Returns:
+// the actual number of bytes skipped.
+__int64 ByteArrayInputStream::skip(__int64 n)
 {
-	int newPos = pos + n;
+    int newPos = pos + n;
 
-	if(newPos > count) newPos = count;
+    if (newPos > count)
+    {
+        newPos = count;
+    }
 
-	int k = newPos - pos;
-	pos = newPos;
+    int k = newPos - pos;
+    pos = newPos;
 
-	return k;
+    return k;
 }
 
 ByteArrayInputStream::~ByteArrayInputStream()
 {
-	if(buf.data != nullptr) delete [] buf.data;
-}
\ No newline at end of file
+    if (buf.data != NULL)
+    {
+        delete[] buf.data;
+    }
+}
diff --git a/Minecraft.World/ByteArrayOutputStream.cpp b/Minecraft.World/ByteArrayOutputStream.cpp
index a6fdad8f..9173941f 100644
--- a/Minecraft.World/ByteArrayOutputStream.cpp
+++ b/Minecraft.World/ByteArrayOutputStream.cpp
@@ -5,55 +5,58 @@
 // Creates a new byte array output stream. The buffer capacity is initially 32 bytes, though its size increases if necessary.
 ByteArrayOutputStream::ByteArrayOutputStream()
 {
-	count = 0;
-	buf = byteArray( 32 );
+    count = 0;
+    buf = byteArray(32);
 }
 
-//Creates a new byte array output stream, with a buffer capacity of the specified size, in bytes.
-//Parameters:
-//size - the initial size.
+// Creates a new byte array output stream, with a buffer capacity of the specified size, in bytes.
+// Parameters:
+// size - the initial size.
 ByteArrayOutputStream::ByteArrayOutputStream(unsigned int size)
 {
-	count = 0;
-	buf = byteArray( size );
+    count = 0;
+    buf = byteArray(size);
 }
 
 ByteArrayOutputStream::~ByteArrayOutputStream()
 {
-	if (buf.data != nullptr)
-		delete[] buf.data;
+    if (buf.data != NULL)
+    {
+        delete[] buf.data;
+    }
 }
 
-//Writes the specified byte to this byte array output stream.
-//Parameters:
-//b - the byte to be written.
+// Writes the specified byte to this byte array output stream.
+// Parameters:
+// b - the byte to be written.
 void ByteArrayOutputStream::write(unsigned int b)
 {
-	// If we will fill the buffer we need to make it bigger
-	if( count + 1 >=  buf.length )
-		buf.resize( buf.length * 2 );
+    // If we will fill the buffer we need to make it bigger
+    if (count + 1 >= buf.length)
+    {
+        buf.resize(buf.length * 2);
+    }
 
-	buf[count] = static_cast<byte>(b);
-	count++;
+    buf[count] = (byte)b;
+    count++;
 }
 
 // Writes b.length bytes from the specified byte array to this output stream.
-//The general contract for write(b) is that it should have exactly the same effect as the call write(b, 0, b.length).
+// The general contract for write(b) is that it should have exactly the same effect as the call write(b, 0, b.length).
 void ByteArrayOutputStream::write(byteArray b)
 {
-	write(b, 0, b.length);
+    write(b, 0, b.length);
 }
 
-//Writes len bytes from the specified byte array starting at offset off to this byte array output stream.
-//Parameters:
-//b - the data.
-//off - the start offset in the data.
-//len - the number of bytes to write.
+// Writes len bytes from the specified byte array starting at offset off to this byte array output stream.
+// Parameters:
+// b - the data.
+// off - the start offset in the data.
+// len - the number of bytes to write.
 void ByteArrayOutputStream::write(byteArray b, unsigned int offset, unsigned int length)
 {
-	assert( b.length >= offset + length );
 
-	if (offset > b.length || length > b.length - offset)
+    if (offset > b.length || length > b.length - offset)
     {
         return;
     }
@@ -61,9 +64,10 @@ void ByteArrayOutputStream::write(byteArray b, unsigned int offset, unsigned int
     if (length > 0xFFFFFFFF - count)
     {
         return;
+    }
 
-	// If we will fill the buffer we need to make it bigger
-	if( count + length >=  buf.length )
+    // If we will fill the buffer we need to make it bigger
+    if (count + length >= buf.length)
     {
         unsigned int newSize = (std::max)(count + length + 1, buf.length * 2);
         if (newSize <= buf.length)
@@ -73,24 +77,23 @@ void ByteArrayOutputStream::write(byteArray b, unsigned int offset, unsigned int
         buf.resize(newSize);
     }
 
-	XMemCpy( &buf[count], &b[offset], length );
-	//std::copy( b->data+offset, b->data+offset+length, buf->data + count ); // Or this instead?
+    XMemCpy(&buf[count], &b[offset], length);
 
-	count += length;
+    count += length;
 }
 
-//Closing a ByteArrayOutputStream has no effect.
-//The methods in this class can be called after the stream has been closed without generating an IOException.
+// Closing a ByteArrayOutputStream has no effect.
+// The methods in this class can be called after the stream has been closed without generating an IOException.
 void ByteArrayOutputStream::close()
 {
 }
 
-//Creates a newly allocated byte array. Its size is the current size of this output stream and the valid contents of the buffer have been copied into it.
-//Returns:
-//the current contents of this output stream, as a byte array.
+// Creates a newly allocated byte array. Its size is the current size of this output stream and the valid contents of the buffer have been copied into it.
+// Returns:
+// the current contents of this output stream, as a byte array.
 byteArray ByteArrayOutputStream::toByteArray()
 {
-	byteArray out(count);
-	memcpy(out.data,buf.data,count);
-	return out;
-}
\ No newline at end of file
+    byteArray out(count);
+    memcpy(out.data, buf.data, count);
+    return out;
+}